Epson Adjustment Program: The Ultimate Guide for Epson PM245 and PM235 Printer Users
How to Reset Epson PictureMate PM245 and PM235 Printer Using Adjustment Program
If you own an Epson PictureMate PM245 or PM235 printer, you may have encountered a problem where your printer stops working and displays an error message saying "Service required. A printer's ink pad is at the end of its service life. Please contact Epson support." This means that your printer's waste ink pad, which collects the excess ink during printing and cleaning, has reached its maximum capacity and needs to be replaced or reset. Otherwise, the waste ink may overflow and damage your printer or cause a fire hazard.
Epson Adjustment Program Pm 245 39
Fortunately, there is a simple and easy way to fix this problem without having to replace or clean the waste ink pad manually. You can use a software tool called Epson adjustment program, which allows you to reset the waste ink pad counter and clear the error message in just a few clicks. In this article, we will show you how to download, install, and use Epson adjustment program to reset your Epson PictureMate PM245 or PM235 printer. We will also give you some tips on how to prevent waste ink pad overflow and extend your printer's life.
Introduction
Epson PictureMate PM245 and PM235 are compact and portable photo printers that can print high-quality photos from your digital camera, memory card, USB flash drive, or smartphone. They have a 2.5-inch LCD screen, a built-in battery, and a handle for easy carrying. They can print 4x6-inch photos in as fast as 37 seconds, with a resolution of up to 5760x1440 dpi. They use four-color dye-based ink cartridges that can print up to 150 photos per cartridge.
Epson adjustment program is a utility software that can perform various functions on your Epson printer, such as checking the current status, performing maintenance tasks, adjusting settings, and resetting counters. One of the most useful functions of this program is resetting the waste ink pad counter, which measures how much ink has been absorbed by the waste ink pad. When this counter reaches a certain limit, usually around 100%, your printer will stop working and display an error message indicating that the waste ink pad needs to be replaced.
Resetting the waste ink pad counter using Epson adjustment program will allow you to continue using your printer without having to replace or clean the waste ink pad. However, this does not mean that you can ignore the waste ink pad completely. You still need to take some measures to prevent the waste ink from overflowing and causing damage to your printer or your environment. We will discuss these measures later in this article.
How to Download and Install Epson Adjustment Program
To reset your Epson PictureMate PM245 or PM235 printer using Epson adjustment program, you need to download and install the resetter software on your computer. You can find the resetter software for Epson PM245 and PM235 on various websites that offer free or paid downloads. However, you need to be careful when downloading from unknown sources, as some of them may contain viruses or malware that can harm your computer or printer. Therefore, we recommend that you download the resetter software from a trusted and reliable source, such as [Epson Resetter].
To download and install Epson adjustment program from [Epson Resetter], follow these steps:
Go to [Epson Resetter] website and search for "Epson PM245" or "Epson PM235" in the search box.
Select the appropriate model from the search results and click on the "Download" button.
Enter your email address and click on the "Send Link" button. You will receive an email with a link to download the resetter software.
Open the email and click on the link to download the resetter software. The file name will be something like "Epson PM245 Resetter.zip" or "Epson PM235 Resetter.zip".
Extract the zip file to a folder on your computer. You will see a folder named "Epson PM245 Adjustment Program" or "Epson PM235 Adjustment Program".
Open the folder and double-click on the file named "AdjProg.exe". This will launch the Epson adjustment program on your computer.
You have successfully downloaded and installed Epson adjustment program on your computer. Now you are ready to reset your Epson PictureMate PM245 or PM235 printer.
How to Reset Epson PictureMate PM245 and PM235 Printer
To reset your Epson PictureMate PM245 or PM235 printer using Epson adjustment program, you need to connect your printer to your computer and perform some steps in the program. Here is how to do it:
Make sure that your printer is turned off and unplugged from the power source.
Connect your printer to your computer using a USB cable.
Plug in your printer to the power source and turn it on.
Open the Epson adjustment program that you installed on your computer.
Select your printer model (PM245 or PM235) from the drop-down menu at the top of the program window.
Select "Auto Selection" or "Manual Selection" from the drop-down menu next to the printer model. If you select "Auto Selection", the program will automatically detect the port where your printer is connected. If you select "Manual Selection", you need to choose the port manually from the list of available ports.
Click on the "OK" button to confirm your selection.
You will see a window with several tabs, such as "Information", "Initialization", "Maintenance", etc. Click on the "Particular Adjustment Mode" tab.
You will see a list of functions that you can perform on your printer, such as "Waste Ink Pad Counter", "Head Cleaning", "Nozzle Check", etc. Click on the "Waste Ink Pad Counter" function.
You will see a window with two buttons: "Check" and "Initialization". Click on the "Check" button to see the current status of your waste ink pad counter. You will see a percentage value indicating how much ink has been absorbed by the waste ink pad. If this value is close to or above 100%, it means that your waste ink pad is full and needs to be reset.
Click on the "Initialization" button to reset your waste ink pad counter. You will see a warning message asking you to confirm your action. Click on the "OK" button to proceed.
The program will start resetting your waste ink pad counter. This may take a few seconds or minutes, depending on your printer model and connection speed. Do not turn off or disconnect your printer during this process.
When the reset process is completed, you will see a message saying "Please turn off printer". Click on the "OK" button and then turn off your printer.
Turn on your printer again and check if the error message has disappeared. If not, repeat the steps above until it does.
You have successfully reset your Epson PictureMate PM245 or PM235 printer using Epson adjustment program. Your printer should now work normally without any error message. However, this does not mean that you can forget about the waste ink pad completely. You still need to take some measures to prevent the waste ink from overflowing and causing damage to your printer or your environment. We will discuss these measures in the next section.
How to Prevent Waste Ink Pad Overflow and Extend Printer Life
Resetting the waste ink pad counter using Epson adjustment program is a temporary solution that can help you fix the error message and continue using your printer. However, this does not solve the underlying problem of the waste ink pad itself. The waste ink pad is a sponge-like material that absorbs the excess ink during printing and cleaning. Over time, this material becomes saturated with ink and can no longer hold any more. When this happens, the waste ink may leak out of the printer and stain your furniture, carpet, or floor. It may also cause corrosion or short circuit in your printer's internal components, resulting in malfunction or fire hazard.
Therefore, it is important to prevent the waste ink pad from overflowing and extend your printer's life. There are two main ways to do this: replacing or cleaning the waste ink pad manually, or using an external waste ink tank or bottle. Let's look at each of these methods in detail.
Replacing or Cleaning the Waste Ink Pad Manually
One way to prevent waste ink pad overflow is to replace or clean the waste ink pad manually. This involves opening your printer's case and removing the waste ink pad from its location. You can then either replace it with a new one or wash it with water and detergent until it is clean and dry. However, this method has some drawbacks and risks that you need to be aware of.
First of all, replacing or cleaning the waste ink pad manually is not an easy task. You need to have some technical skills and tools to open your printer's case and access the waste ink pad. You also need to be careful not to damage any other parts of your printer while doing so. Moreover, you need to wear gloves and protective clothing to avoid contact with the waste ink, which may be toxic or harmful to your skin or eyes.
Secondly, replacing or cleaning the waste ink pad manually is not a permanent solution. Even if you replace or clean the waste ink pad, it will eventually become full again after some time. You will need to repeat this process every time your printer's waste ink pad counter reaches its limit. This can be costly and time-consuming, as well as inconvenient and messy.
Using an External Waste Ink Tank or Bottle
Another way to prevent waste ink pad overflow is to use an external waste ink tank or bottle. This involves attaching a hose or tube to your printer's waste ink outlet and diverting the waste ink into a container outside your printer. This way, you can avoid filling up your printer's internal waste ink pad and prevent any leakage or damage. You can then dispose of the waste ink safely and easily when the container is full.
Using an external waste ink tank or bottle has some advantages over replacing or cleaning the waste ink pad manually. First of all, it is easier and safer to install and use. You do not need to open your printer's case or touch the waste ink pad at all. You just need to attach a hose or tube to your printer's waste ink outlet and place a container under it. You can use any suitable container, such as a plastic bottle, a jar, or a bucket, as long as it has a lid and can hold enough liquid.
Secondly, using an external waste ink tank or bottle is more effective and economical. It can collect more waste ink than your printer's internal waste ink pad and extend your printer's life significantly. You do not need to reset your printer's waste ink pad counter or replace or clean the waste ink pad frequently. You just need to check the level of the container regularly and empty it when it is full.
However, using an external waste ink tank or bottle also has some drawbacks and precautions that you need to consider. First of all, you need to make sure that the hose or tube is securely attached to your printer's waste ink outlet and that there are no leaks or kinks in it. Otherwise, you may end up with a mess on your desk or floor. You also need to make sure that the container is placed on a stable surface and that it has a lid that prevents evaporation or spillage.
Secondly, you need to be careful when disposing of the waste ink in the container. The waste ink may contain chemicals that are harmful to your health or the environment. You should not pour it down the drain or throw it in the trash. You should follow the local regulations for disposing of hazardous waste materials and take it to a designated facility for proper treatment.
Conclusion
In this article, we have shown you how to reset your Epson PictureMate PM245 or PM235 printer using Epson adjustment program, a software tool that can reset the waste ink pad counter and clear the error message in just a few clicks. We have also given you some tips on how to prevent waste ink pad overflow and extend your printer's life, such as replacing or cleaning the waste ink pad manually, or using an external waste ink tank or bottle.
We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. We would love to hear from you and help you with any issues you may have with your Epson PictureMate PM245 or PM235 printer.
FAQs
Here are some frequently asked questions and answers about Epson PictureMate PM245 or PM235 printer and Epson adjustment program.
What are some common problems and solutions for Epson PictureMate PM245 or PM235 printer?
Some of the common problems and solutions for Epson PictureMate PM245 or PM235 printer are:
Printer does not turn on or respond: Check the power cord and the battery, and make sure they are properly connected and charged. If the problem persists, contact Epson support.
Printer does not print or prints blank pages: Check the ink cartridges and make sure they are installed correctly and have enough ink. Perform a nozzle check and a head cleaning if necessary. If the problem persists, contact Epson support.
Printer prints poor quality photos: Check the paper type and size, and make sure they match the printer settings. Use Epson genuine photo paper and ink cartridges for best results. Adjust the print quality and color settings if necessary. If the problem persists, contact Epson support.
Printer displays an error message: Check the error code and the message, and follow the instructions on the LCD screen or the user manual. If the error message is related to the waste ink pad, use Epson adjustment program to reset it. If the problem persists, contact Epson support.
How often do I need to reset my printer using Epson adjustment program?
The frequency of resetting your printer using Epson adjustment program depends on how often you use your printer and how much ink it consumes. The more you print and clean your printer, the faster your waste ink pad will fill up and need to be reset. Generally, you may need to reset your printer every few months or years, depending on your usage patterns. You can check the status of your waste ink pad counter using Epson adjustment program at any time.
Is it safe and legal to use Epson adjustment program?
Yes, it is safe and legal to use Epson adjustment program to reset your printer. However, you need to be careful when downloading and installing the program from unknown sources, as some of them may contain viruses or malware that can harm your computer or printer. You also need to follow the instructions carefully when using the program, as improper use may cause damage or malfunction to your printer. Moreover, you need to be responsible for disposing of the waste ink in a safe and eco-friendly way.
Where can I find more information and support for Epson PictureMate PM245 or PM235 printer?
You can find more information and support for Epson PictureMate PM245 or PM235 printer on the official Epson website, where you can download drivers, manuals, software, firmware, FAQs, videos, etc. You can also contact Epson customer service by phone, email, chat, or social media for any queries or issues you may have with your printer.
What are some alternative ways to reset Epson PictureMate PM245 or PM235 printer?
Besides using Epson adjustment program, there are some alternative ways to reset Epson PictureMate PM245 or PM235 printer, such as using other resetter software tools, using hardware devices, or using service mode commands. However, these methods may not be as easy or reliable as using Epson adjustment program, and they may require more technical skills or tools. Therefore, we recommend that you use Epson adjustment program as your first choice for resetting your printer. dcd2dc6462